Fatt at NOMCON

What to Build

Something fun that can be activated by an RFID swipe (we have support for that part).  Some of the current ideas are action figures that will spin for you, a motorized wheel of fortune, a high-five robot hand… the options are limitless. 

Projects should be tabletop size with a footprint that is approximately 18″ x 22″ and as high as is needed to be stable.

Projects are due on-site by June 14th but they can be shipped to the conference center beforehand. 

 

How it works

  1. You sign up to build an interactive access point device for NOMCON by emailing [email protected] with your shipping information
  2. We send you a base kit!
  3. You bring your device for placement to NOMCON (or ship it and we will set it up)

Included in a Base Kit

  • 3 x 4-wire cables with spade terminals and 5-pin Molex KK Connector
  • 1 Assembled FATT Board with 12V Barrel Connector (2.1mm x 5.5mm Center Positive)
    • 1 Populated 12v Relay
    • See Channel for more spect on fat board
  • 2 LED Button Assemblies – 24mm Arcade Buttons
  • Molex KK Connector (5pin)
  • 5x color code wire set with spring push connector for Molex KK
  • 1 EM4100 (125khz / IC 13.56mhz) RFID Reader (use of alternate USB RFID Reader Okay)
  • 1 Set of test Fobs

List of things you will need to add

    • Raspberry Pi 3B or 3B+ (if you need one sponsored please reach out)
    • Voltage divider or logic level converter for RFID Reader
    • Enclosure
    • 12v power supply
    • Interior mount for Rpi with FATT Board assembly

Tools

Two-button “lamp” box enclosure

laser cut finger jointed box.

Material: Quarter inch plywood
Height: 103.35 mm
Width: 383.6 mm
Depth: 189.8 mm
File: FATT-TwoButtonLampBox